Table of Contents
Advertisement
3.3
Weld data
If you use the synergic function for the welding power source, you'll only need to set
the welding current.
The welding current can even be adjusted while welding is underway by pressing the
+/-- buttons. If the welding power source is set to synergic mode, the arc force is
regulated automatically whenever the welding current is adjusted.
In the settings menu you can see what value has been chosen for the parameter
welding current.
Display the SETUP
menu by pressing
the SET button.
With our chosen
combination of
electrode type and
electrode diameter
the power source
has set the welding
current to 80 A.
bu12d04a
PROCESS:
ELECTRODE TYPE:
ELECTRODE DIAMETER:
AUXILIARY FUNCTIONS
SET
MEASURE
CURRENT:
SYNERGIC MODE:
- - 27 - -
ESAB LUD 450
STICK
BASIC (E7018)
1/8" (2.5mm)
"
FAST
MEMORY
MODE
WELD PARAMETERS
80 A
ON
QUIT
ENTER
Advertisement
Table of Contents
