Stick--Configuration; Setting Example Stick - ESAB PUA 1 Manual

3.4 STICK- -configuration
Under section 9.2.6.
3.5

Setting Example STICK

Following is an example of how to set up for STICK welding.
3.5.1 Basic Settings
The main menu is used to make the settings that concern choice of electrode.
First we call up the main menu, if this has not already been done, by pressing the
MENU button.
We will make the following three settings:
PROCESS = STICK
S
ELECTRODE TYPE= RUTILE
S
ELECTRODE DIAMETER = 1/8" (2.5 mm)
S
Process
Use the arrow
buttons to select
PROCESS. Press
ENTER to call up a
list of options.
Position the cursor over the STICK option in the list
and press ENTER. We have now set PROCESS =
STICK.
Electrode Type
Use the arrow
buttons to select
ELECTRODE TYPE.
Press ENTER to call
up a list of options.
Position the cursor over the RUTILE option in the
list and press ENTER. We have now
set ELECTRODE TYPE = RUTILE.
bu12d04a
PROCESS:
ELECTRODE TYPE:
ELECTRODE DIAMETER:
AUXILIARY FUNCTIONS
SET MEASURE
PROCESS:
ELECTRODE TYPE:
ELECTRODE DIAMETER:
AUXILIARY FUNCTIONS
SET MEASURE
- - 28 - -
ESAB LUD 450
STICK
BASIC (E7018)
1/4" (6mm)
FAST
MEMORY MODE
MIG
STICK
TIG
CARBON, ArcAir
ESAB LUD 450
STICK
BASIC
1/4" (6 mm)
FAST
MEMORY MODE
BASIC (E7018)
RUTILE (E6011)
CELLULOSE (E6010)
ENTER
ENTER