Table of Contents
Advertisement
5.4.2
Weld Data
In the settings menu you can see which value has been selected for the voltage
parameter. If necessary you can also adjust the voltage setting.
Go to the settings
menu by pressing
the SET button.
On the basis of our
electrode diameter
setting the power
source has set the
voltage to 41 V.
bu12d04a
PROCESS:
ELECTRODE DIAMETER:
AUXILIARY FUNCTIONS
SET
MEASURE
WELD DATA SETTING
VOLTAGE:
SYNERGIC MODE:
- - 40 - -
ESAB LUD 450
CARBON. ArcAir
1/4 in (6 mm)
FAST
MEMORY
MODE
41.0 V
ON
QUIT
ENTER
Advertisement
Table of Contents
