ESAB PUA 1 Manual page 18

Method
Position the cursor
on the line for
METHOD. Press
ENTER to call up a
list of options.
Position the cursor on the line for DIP/SPRAY in
the list and press ENTER.
We have now set METHOD = DIP/SPRAY.
Wire Type
Position the cursor
on the line for
WIRE TYPE. Press
ENTER to to call
up a list of options.
Here is an example of a list with so many options
that they cannot all be displayed at the same time.
The arrow in the bottom right corner of the list indicates
that more options will become visible as you
scroll down the list.
Now position the cursor on the line for Fe and press ENTER. We have now set
WIRE TYPE = Fe.
bu12d04a
PROCESS:
METHOD:
WIRE TYPE:
SHIELDING GAS:
WIRE DIAMETER:
AUXILIARY FUNCTIONS
SET MEASURE
PROCESS:
METHOD:
WIRE TYPE:
SHIELDING GAS:
WIRE DIAMETER:
AUXILIARY FUNCTIONS
SET MEASURE
- - 18 - -
ESAB LUD 450
MIG
DIP/SPRAY
Metal cored Fe
Ar+8%CO2
0.040" (1.0mm)
FAST
MEMORY MODE
DIP/SPRAY
PULSE
ESAB LUD 450
MIG
DIP/SPRAY
Metal cored Fe
Ar+8%CO2
0.040" (1.0mm)
FAST
MEMORY MODE
Fe (Steel)
Ss Stainless
Ss Duplex
5000 Alum
4000 Alum
Metal cored Fe
T1--FCW--Steel
ENTER
ENTER