ESAB PUA 1 Manual page 76

How to Upgrade:
Choose the unit(s) that need to be upgraded by placing the cursor in the respective
lines and marking (
upgraded, press "EXECUTE UPGRADE" and confirm with "yes" to start the
upgrading.
Place the cursor on
the line for the unit to
be upgraded.
Press in the first button to mark the unit (becomes highlighted).
S
By pressing in the button again, the selection is undone (highlight disappears).
If there are several units to be upgraded, they are marked in the same way.
Press YES to
upgrade. Upgrading
can take up to five
minutes.
bu12d04a
) them. When you have finished marking that which will be
Unit
SYSTEM VERSION
BOOT SOFTWARE
POWER SOURCE
WIRE FEEDER
WELD CONTROL UNIT
Unit
THE SOFTWARE UPGRADING CAN TAKE UP TO 5
MINUTES AND CANNOT BE INTERRUPTED.
DO YOU STILL WANT TO DO IT?
- - 76 - -
SOFTWARE UPGRADE
Curr.ver
1.50A
2.00A
1.31E
QUIT
SOFTWARE UPGRADE
Curr.ver
NO
PC--card
1.00B
1.12
1.50B
2.00A
1.31F
UPGRADE
NOW
PC--card
YES