Table of Contents
Advertisement
9.8
Upgrading the Software
Areas of Use
With this function, you can upgrade your software on different units (circuit boards)
with a new software program (new functions). This is done from a PC card.
The term unit refers to a circuit board with software programs which can be
upgraded.
Current version
PC card
?
- -
System version
Boot program
Current source
Wire feed unit
Weld data unit
bu12d04a
MAIN MENU
AUXILIARY FUNCTIONS
SOFTWARE UPGR.
SOFTWARE UPGRADE
Unit
SYSTEM VERSION
BOOT SOFTWARE
POWER SOURCE
WIRE FEEDER
WELD CONTROL UNIT
Describes which software version is active in this unit.
Describes which software version is stored on the
PC card of this unit.
There is a unit but the computer does not know which
one it has.
There is no software for this unit on the PC card
States which software set--up is stored on the PC card.
A software set--up can consist of 1--4 programs (1 for
each unit).
Program for handling of upgrades.
Circuit board for control of weld current source.
Circuit board for control of wire feeding.
Circuit board in the user controller.
- - 75 - -
Curr..ver
PC--card
1.00B
1.12
1.50A
1.50B
2.00A
2.00A
1.31E
1.31F
QUIT
UPGRADE
NOW
Advertisement
Table of Contents
