5 OPERATION
5.1
Connections
1. Push button (menu access)
2. Push button (return to previous menu)
3. Push button encoder (parameter adjust and
display navigation)
4. Encoder (parameter adjust)
5. Electrode negative terminal (-)
6. Polarity changeover cable
5.2
Cable connection - Weld, return and polarity
change over
The power source has two output studs for connecting the weld and return cables: Electrode negative
[-] terminal (5) and Electrode positive [+] terminal (8), see Section 5.1 "Connections", page 14.
GMAW Synergic & Manual mode - solid wires GMAW Synergic & Manual mode - FCAW wires
0447 978 001
7. Torch trigger and spool gun control receptable
8. Electrode positive terminal (+)
9. GMAW torch and spool gun connection
10. Mains supply cable
11. Mains supply switch, ON/OFF
12. Gas inlet
- 14 -
© ESAB AB 2023