Removal / Installation - Polaris RANGER XP 900 2018-2019 Service Manual

STEERING / SUSPENSION

REMOVAL / INSTALLATION

1. Elevate and safely support the vehicle with weight
removed from the rear wheel(s).
2. Using a 13mm socket, remove the four nuts retaining
the stabilizer bar to the frame.
3. Using a 15mm socket, remove the upper stabilizer
bar linkage nut on each side.
4. Remove the stabilizer bar from the frame and inspect
the stabilizer bar for straightness.
5. Reverse this procedure for installation.
6. Torque the stabilizer bar mounting bolts and upper
rubber linkage bushing nuts to specification.
TORQUE
Stabilizer Bar Fasteners:
17 lb-ft (23 Nm)
8.26
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.