Propshaft U-Joint Service; Propshaft U-Joint Disassembly - Polaris RANGER XP 900 2018-2019 Service Manual

PROPSHAFT U-JOINT SERVICE

PROPSHAFT U-JOINT DISASSEMBLY

NOTICE
Before servicing the prop shaft U-joint, be sure the joint
is clean to ensure no debris damages the yoke.
1. With the prop shaft removed and marked for
alignment orientation, remove the retaining rings
from both sides of the yoke.
2. Using a commercially available Ball Joint / U-Joint
Press Set, place a receiving cup adapter
larger ID than the U-joint cap OD on one end.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
3. Place a remover adapter
with a smaller OD than the U-joint cap.
q
4. Position clamp
remover adapter.
w
with a
5. Tighten clamp with hand tools to force U-joint cups
out of yoke.
FINAL DRIVE
e
on other end of U-joint
r
over receiving cup adapter and
7
7.11