Intake Installation - Polaris RANGER XP 900 2018-2019 Service Manual

ENGINE / COOLING / HVAC SYSTEM

INTAKE INSTALLATION

1. Install the clamp onto the intake duct, and then install
the intake duct into the LH upper fender. Torque the
clamp to specification.
TORQUE
Intake Duct Clamps:
17 lb-in (2 Nm)
2. Install the air box intake hose into the close-off panel.
Install the clamp holding the air box intake hose to the
intake duct. Torque the clamp to specification.
TORQUE
Intake Duct Clamps:
17 lb-in (2 Nm)
3.98
3. Place the air box assembly with engine intake hose
into the vehicle. Install the clamp holding the air box
intake hose to the air box assembly. Torque the clamp
to specification.
Intake Duct Clamps:
17 lb-in (2 Nm)
4. Install the fasteners holding the air box assembly to
the frame of the vehicle. Torque the fasteners to
specification.
Air Box Fasteners:
8 lb-ft (11 Nm)
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
TORQUE
TORQUE
© Copyright Polaris Industries Inc.