Polaris RANGER XP 900 2018-2019 Service Manual page 129

5. Install the Cylinder Holding & Camshaft Timing Plate
(PU-50563) onto the cylinder. The cylinder holding
tool retains the cylinder and pistons when the engine
is rotated.
6. Rotate engine to access the crankcase sump cover.
7. Remove the thirteen M6 and three M8 bolts retaining
the sump cover (D) to the crankcase.
8. Remove the sump cover (D) from the crankcase.
9. Remove and clean oil pump pick-up (E).
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
ENGINE / COOLING / HVAC SYSTEM
10. Remove the three bolts (F) that retain the oil pump
(G) to the crankcase.
11. Use one of the oil pump retaining bolts or a pen
magnet to extract the dowel pins (H) from the oil
pump. Doing so allows for oil pump removal without
having to remove the pump drive sprocket.
NOTICE
If unable to extract the dowel pins from the oil pump,
the oil pump sprocket must be removed. Access the
sprocket bolt by removing the case plug.
3
3.49