Polaris RANGER XP 900 2018-2019 Service Manual page 382

Table of Contents

Advertisement

FINAL DRIVE
4. Check to make sure the coil
top of the coil should be seated below the U-shaped insert. The U-shaped insert controls the pole gap. If the top of
the coil is above the surface of the U-shaped insert it raises the armature plate, thereby increasing pole gap. If the
pole gap increases the coil will not be strong enough to engage the AWD system. If this is found, replace the cover
plate assembly.
5. Inspect the rollers for nicks, scratches, and flat spots. Also inspect the roll cage
a
are able to slide up and down and in and out freely within the roll cage sliding surfaces.
7.34
t
is seated in the U-shaped
y
insert that is pressed into the gearcase cover
o
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
for cracks and ensure the rollers
© Copyright Polaris Industries Inc.
u
. The

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ranger xp 1000 2018-2019Ranger crew 900 2018-2019Ranger crew 1000 2018-2019

Table of Contents