Main Floor Removal; Body / Frame; Front Floor Removal - Polaris RANGER XP 900 2018-2019 Service Manual

MAIN FLOOR REMOVAL

1. Remove both rocker panels. Refer to "Rocker Panel
Removal"page 10.31 procedure.
2. Remove the four push rivets retaining the drive shaft
cover (A) and remove the cover from the vehicle.
3. Remove the T-40 Torx-head screws retaining the
main floor.
4. Lift and remove the main floor from the vehicle.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.

FRONT FLOOR REMOVAL

1. Remove the lower dash panel and dash storage
panel. Refer to "Dash Panels / Glove Box
Removal"page 10.30 procedure.
2. Remove the main floor. Refer to "Main Floor
Removal"page 10.33 procedure.
3. Remove the clip and pin (T) securing the brake pedal
to the master cylinder push rod. Remove the
fasteners retaining the throttle and brake pedal
mount.
4. Disconnect the pedal position sensor (U) and the
electrical connectors at the EPS unit (V), if equipped.
5. Remove the three plastic tie straps retaining the
pedal position sensor harness to the front floor.
6. If equipped, remove the fasteners retaining the EPS
unit to the lower steering shaft.
7. If equipped, remove the four fasteners (W) for the
EPS mount and remove the EPS unit and mount as
one.
8. Remove the lower steering shaft. Refer to "Lower
Steering Shaft Removal"page 8.7 procedure.

BODY / FRAME

10
10.33