Polaris RANGER XP 900 2018-2019 Service Manual page 307

3. If removed, inspect the outer clutch rollers and roller
pins for excessive wear or damage. Replace as needed.
4. Remove the E-rings and thrust washers from each end
of the spider assembly. Remove and inspect the inner
clutch rollers for excessive wear or damage. Replace
components as needed. Use new E-rings upon
assembly.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
5. Inspect the flanged bearings in the clutch sheaves and
cam (helix). If bearings are damaged or have an
excessive amount of wear, the entire component must be
replaced.
NOTICE
The flanged bearings are not serviceable. If either
clutch sheave bearing requires replacement, the entire
driven clutch assembly must be replaced. Refer to the
Polaris Electronic Parts catalog for specific parts
availability.
PVT SYSTEM
5
5.29