Caliper Removal; Caliper Disassembly - Polaris RANGER XP 900 2018-2019 Service Manual

BRAKE SYSTEM

CALIPER REMOVAL

1. Elevate and safely support the front of the vehicle.
2. Remove the four wheel nuts and the front wheel.
WARNING
Use care when supporting vehicle so that it does not tip
or fall. Severe injury may occur.
3. Clean caliper area before removal.
4. Place a container below the caliper to catch brake
fluid when removing line. Remove brake line
caliper.
5. Loosen brake pad adjustment set screw
brake pad removal after the caliper is removed.
9.16
6. Remove the two caliper mounting bolts and caliper
e
.
q
from

CALIPER DISASSEMBLY

1. Remove both brake pads from the caliper. Refer to
"Front Brake Pad Removal"page 9.12 procedure.
2. Remove the mount bracket assembly
boots
before disassembly and prepare a clean work area.
w
to allow
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
w
from caliper. Thoroughly clean caliper
© Copyright Polaris Industries Inc.
q
and dust