Polaris RANGER XP 900 2018-2019 Service Manual page 358

FINAL DRIVE
9. Slide the rear section of the propshaft assembly from
the transmission output shaft.
10. Remove the propshaft assembly through the rear
floor opening.
Installation
1. Install the rear section of the propshaft onto the
transmission output shaft.
2. Install and torque the two flex bearing mounting
fasteners to specification.
TORQUE
Flex Bearing Mounting Fasteners:
40 lb-ft (54 Nm)
3. Install rear floor (see Rear Floor - CREWpage 10.34).
4. Install rear skid plate.
5. Install front skid plate.
6. Install front section of the propshaft.
7. Install the front gearcase (see Front Gearcase
Installationpage 7.23).
7.10
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.