Polaris RANGER XP 900 2018-2019 Service Manual page 155

9. Install the eight M10, two M8 and one M6 lower
crankcase bolts. Tighten all bolts lightly by hand.
NOTICE
Install new M10 lower crankcase bolts.
10. Torque lower crankcase bolts in sequence to
specification. Repeat sequence to verify final torque.
TORQUE
Lower Crankcase Bolts:
M10 Bolts:
Step 1: 9 lb-ft (12 Nm)
Step 2: 21 lb-ft (28 Nm)
Step 3: Additional 90°
M8 Bolts: 26 lb-ft (35 Nm)
M6 Bolts: 9 lb-ft (12 Nm)
11. Rotate the engine so the cylinder is facing up.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
ENGINE / COOLING / HVAC SYSTEM
12. Install the eleven M6 and two M8 upper crankcase
bolts. Tighten all bolts lightly by hand.
13. Torque the upper crankcase bolts in sequence to
specification (start with #12). Repeat the sequence
to verify final torque.
TORQUE
Upper Crankcase Bolts:
M8 Bolts: 26 lb-ft (35 Nm)
M6 Bolts: 7 lb-ft (10 Nm)
14. Rotate the engine so the cylinder is facing down.
15. Install a new seal on the oil pump.
3
3.75