Polaris RANGER XP 900 2018-2019 Service Manual page 385

3. Align the top of the bearing carrier with the upper A-
arm. Install the upper bearing carrier fastener.
NOTICE
The lower shock bolt may need to be removed to allow
the upper A-arm to move freely.
4. Torque the upper and lower bearing carrier fasteners
to specification.
TORQUE
Bearing Carrier Fasteners:
40 lb-ft (54 Nm)
5. Install the wheel hub assembly onto the drive shaft.
6. Install the washers (D) with domed side out and the
wheel hub castle nut (E). Torque the wheel hub
castle nut to specification and install a NEW cotter
pin (F).
TORQUE
Rear Wheel Hub Castle Nuts:
110 lb-ft (149 Nm)
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
7. Install the rear brake caliper and torque the mounting
bolts to specification.
TORQUE
Rear Caliper Mounting Bolts:
46 lb-ft (62 Nm)
8. Install the wheel, washers and wheel nuts. Torque
wheel nuts to specification.
TORQUE
Wheel Nuts (Steel): 60 lb-ft (81 Nm)
Wheel Nuts (Alum): 120 lb-ft (163 Nm)
FINAL DRIVE
7
7.37