Polaris RANGER XP 900 2018-2019 Service Manual page 101

8. Disconnect the harness from the T-MAP sensor (A),
ETC (B), fuel injectors (C), rear differential relay and
solenoid (D). Remove the five plastic tie straps (E)
retaining the harness to the intake plenum.
9. Disconnect the CPS (F), vehicle speed sensor (G),
ECT sensor (H) and transmission switch (I). Remove
the two plastic tie straps (J) retaining the harness to
the transmission.
10. Using an 8mm socket, remove the two bolts retaining
the fuel rail and fuel injectors. Remove the fuel rail
assembly from the intake and position the assembly
to allow engine removal.
11. Remove the spark plug wires from the engine.
NOTICE
The spark plug wires are marked with MAG and PTO.
Note during installation procedure.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
ENGINE / COOLING / HVAC SYSTEM
12. Disconnect the stator harness in front of the engine.
13. Using a 13mm socket and wrench, remove the
fastener (K) securing the bottom of the intake
plenum to the rear transmission mount.
3
3.21