Polaris RANGER XP 900 2018-2019 Service Manual page 341

13. Slowly rotate the snorkel tube clockwise while
counting the number of notches passing through the
hole opening as you rotate the tube. Rotate the
snorkel tube to the 3rd notch from the 'zero'
backlash position obtained in step 11.
14. Check the pinion shaft gear backlash again by feel. If
the pinion shaft gear lash appears to be too tight,
rotate the snorkel shaft clockwise to the next notch
(4th notch).
15. Once the backlash is set, apply Loctite
threads and install the locking screw to secure the
snorkel tube.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
16. Torque the locking screw to specification.
® 242 to the
TRANSMISSION
TORQUE
Snorkel Locking Screw:
8–10 lb-ft (11–14 Nm)
6
6.29