Polaris RANGER XP 900 2018-2019 Service Manual page 374

FINAL DRIVE
8. Remove the torsion spring
i
gear .
9. Remove the roll cage assembly
i
ring gear . Inspect for wear.
10. Remove the LH output hub
7.26
u
from the top of the ring
o a
, rollers , and
s
.
11. Inspect the bearing and contact surfaces of the output
hub for signs of wear or damage. Replace component
if found to be worn or damaged.
12. Thoroughly clean all parts. Inspect the bearing
surfaces of the output hub. Inspect the rollers
nicks, scratches and flat spots. Inspect the roll cage
o
for damage or cracks. The rollers must slide up
and down freely within the roller cage surfaces.
13. Inspect the ring gear
or damage. The surfaces should be free of nicks or
burrs.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
i
for inconsistent wear patterns
© Copyright Polaris Industries Inc.
a
for