Disassembly / Inspection, Front Gearcase (Adc) - Polaris RANGER XP 900 2018-2019 Service Manual

DISASSEMBLY / INSPECTION, FRONT
GEARCASE (ADC)
1. Drain and properly dispose of used oil. Remove any
metal particles from the drain plug magnet
w
2. Remove bolts retaining the outer cover plate
assembly.
3. Remove the outer cover plate assembly.
NOTICE
Press on the output hub assembly
r
the outer cover plate to prevent removing more than
the cover plate.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
4. Remove the output hub assembly
q
.
5. Inspect the bearing and contact surfaces of the output
hub for signs of wear or damage. Replace component
if found to be worn or damaged.
6. Remove and inspect the armature plates
"AWD Diagnosis" for detailed inspection process.
7. Remove the torsion spring retainer
e
while lifting up on
FINAL DRIVE
e
.
7
t
. Refer to
y
.
7.25