Qiagen PyroMark Q96 ID User Manual page 65

8. In the "Instrument Parameters" drop-down list, select the
9. Click
10. Open the instrument lid.
11. Open the process chamber lid.
12. Place an empty PyroMark Q96 Plate Low on the heating
13. Close the process chamber lid.
14. Open the dispensing unit cover and insert an empty
15. Close the dispensing unit cover and press the latch down
16. Close the instrument lid.
17. Check that the instrument is connected by selecting
PyroMark Q96 ID User Manual 01/2016
Note: If there are no existing assays in the shortcut
browser, refer to section 5.3.1 to set up a new one.
instrument parameters file that corresponds to the
PyroMark Q96 Cartridge to be used.
to save.
block.
reagent cartridge.
into its locked position.
"Preferences" from the "Tools" menu.
Note: If the instrument name does not appear, click
"Find Instrument" to have the software detect the
connected PyroMark Q96 ID Instrument. Upon detecting
the instrument, the software will enter the instrument
serial number and URL. Assign a name to the instrument
and click "Save".
PyroMark Q96 Software
6-7