Qiagen PyroMark Q96 ID User Manual page 64

PyroMark Q96 Software
1. Start the operator's computer. Microsoft Windows starts
2. Press "Ctrl" + "Alt" + "Delete" and log on as the
3. Start the PyroMark Q96 ID using the standby switch on
4. Start the PyroMark Q96 Software from the "Start" menu.
5. In the shortcut browser, right-click the folder in which to
6. Click
7. Add an assay to all wells, e.g., select all wells and drag
6-6
and displays the welcome screen.
Administrator. No password is required. The Windows
desktop will appear.
the front panel. All lights on the front panel will
illuminate. The instrument software is loaded onto the
PyroMark Q96 ID. This takes 1–3 min. The yellow "Busy"
light on the instrument will then go out and the yellow
"Information" light will start to flash. The instrument is
now ready to receive instructions from the operator's
computer.
place the installation test run file, and select "New Run"
from the context menu.
in the toolbar to enter a run name and save the
file in the desired folder.
an assay from the shortcut browser to the selection.
PyroMark Q96 ID User Manual 01/2016