Installing The Pyromark Data Converter Tool; Using The Pyromark Data Converter Tool - Qiagen PyroMark Q96 ID User Manual

6.4.1

Installing the PyroMark Data Converter Tool

1.
2. Install the PyroMark Data Converter software on the
6.4.2

Using the PyroMark Data Converter Tool

The PyroMark Data Converter tool converts Pyrosequencing
runs set up and completed with the old PyroMark Q96 ID
Software into a file format that is compatible with the new
PyroMark Q96 Software. This tool copies the run data,
converts the data to the new format, and exports the
converted data to the location specified by the user. Only
sequence analysis (SQA) and genotyping (SNP) runs which
have been executed and completed will be converted. CpG
assays generated with the PyroMark CpG Software do not
need to be converted. These runs are in a format that is
compatible with the new PyroMark Q96 Software. Runs
containing multiplex assay data cannot be converted and are
skipped during the conversion procedure.
1. Open the PyroMark Data Converter and open the
PyroMark Q96 ID User Manual 01/2016
The PyroMark Data Converter can be downloaded at
www.qiagen.com/goto/PyroMarkDataConverter
cost. In order to access this page and download the
software, you must register your instrument with a valid
serial number (see back of instrument) at
www.qiagen.com/PyroMarkRegistration.
instrument operating computer containing the database
of runs to be converted. This computer must be running
the Microsoft Windows XP operating system.
Database Settings window by clicking "Connect" or
selecting "Connect" from the "File" menu.
PyroMark Q96 Software
at no
6-3