Post-Run Procedures; Analyzing The Run - Qiagen PyroMark Q96 ID User Manual

Operating Procedures
A run progress bar displays the current state of a run (e.g.,
preparing for run, adding reagents, run, end of run,
connection lost) and the time remaining to complete the run.
Warnings during a run
Errors may occur during a run, which triggers warnings that
will appear in the "Warnings" pane. The warning is also
documented in the Run Log of the "Run Information". If an
error occurs during a run, a dialog box that appears at the
end of the run gives the user the option to review the Run
Information.
Restoring a run
If the connection to the instrument is lost during a run, a
message box will appear to inform the user. Upon clicking
"OK", the "Run" view will close, but the instrument will
continue to process the run. The data collected will be stored
on the instrument, and the run file can be restored. See the
PyroMark Q96 Software User Guide for more information.
5.6

Post-run procedures

5.6.1

Analyzing the run

Detailed instructions for analyzing the run are available in
the PyroMark Q96 Software User Guide (press the "F1" key
when in PyroMark Q96 Software).
Analysis modes
PyroMark Q96 Software has four analysis modes: AQ, SNP,
CpG, and SQA. To toggle between the modes, select "AQ",
"SNP", "CpG", or "SQA" in the toolbar.
Note: How the analysis is performed can be modified using
the "Analysis Setup" tab.
5-18 PyroMark Q96 ID User Manual 01/2016