Table of Contents
Advertisement
Operating Procedures
Shut down the instrument only if it will not be used again
within two weeks. See Section 7.1 for shutdown instructions.
5.7.3
Exiting PyroMark Q96 Software
Exit the PyroMark Q96 Software by choosing "Exit" from the
"File" drop-down menu.
5.7.4
Cleaning the instrument
Remove any spillages around the dispensing unit and
process chamber with a clean, lint-free cloth. See Sections
7.2 through 7.6 for detailed cleaning instructions.
5.7.5
Emptying the waste container and troughs
WARNING
Hazardous chemicals
The Denaturation Solution used with the vacuum
workstation contains sodium hydroxide, which is irritating
to eyes and skin.
Always wear safety glasses, gloves, and a lab coat.
The responsible body (e.g., laboratory manager) must take
the necessary precautions to ensure that the surrounding
workplace is safe and that the instrument operators are not
exposed to hazardous levels of toxic substances (chemical
or biological) as defined in the applicable Safety Data
Sheets (SDSs) or OSHA,* ACGIH,
For more information, visit www.qiagen.com/safety.
Venting for fumes and disposal of wastes must be in
accordance with all national, state, and local health and
safety regulations and laws.
* OSHA: Occupational Safety and Health Administration (United States of America).
†
ACGIH: American Conference of Government Industrial Hygienists (United States of America).
‡
COSHH: Control of Substances Hazardous to Health (United Kingdom).
5-24
†
or COSHH
PyroMark Q96 ID User Manual 01/2016
[W4]
‡
documents.
Advertisement
Table of Contents
