5.4
Setting up a protocol run
To setup a protocol run, press the Setup tab on the Home screen.
Commonly used QIAGEN protocols are pre-installed on the EZ2 upon delivery. You can download
all available QIAGEN protocols from the QIAGEN website.
The EZ2 software will guide you through the protocol run setup process. The steps of the protocol
wizard vary, depending on the selected protocol and may differ from the figures included in this
section.
Important: Before starting a protocol run, read the relevant QIAGEN kit handbook and follow the
instructions on sample storage, handling and preparation provided in the handbook.
5.4.1
Selecting application type
To begin setting up a protocol run, tap an application in the Applications pane, a favorite protocol
in the Favorites pane, or a recently used protocol in the Recently Used pane.
Figure 52. Select an application screen.
EZ2 Connect and EZ2 Connect Fx User Manual 09/2021
81