APRILIA Tuono V4 1100 Factory Service Station Manual page 80

Maintenance
•
Operating on the right side of the vehi-
cle, remove the screw that fastens the
rear bank oil pressure sensor to the
base of the filter housing.
•
Unscrew the eight screws to remove
the lower intake ducts.
•
Partially lifting the filter housing base,
after having removed the pipe clamps,
disconnect the vapour recovery pipe of
the blow by valve on the left and the
vapour recovery pipe of the sas valve
on the right.
•
Operating on the left side of the vehi-
cle, remove the clamp that fastens the
engine wiring harness to the filter hous-
ing base.
MAIN - 80
Tuono V4 1100 Factory