APRILIA Tuono V4 1100 Factory Service Station Manual page 117

Tuono V4 1100 Factory
TABLE C - MAIN WIRING HARNESS BRANCH
•
Using a large clamp, fasten the main
wiring harness branch to the right side
under-fairing, at the indicated point.
TABLE D - ELECTRONIC FORKS (IF PRESENT)
•
Pre-install the wiring harness (1) of the
electronic forks on the upper steering
plate and after having secured it by
means of special clamps (2) in the in-
dicated points, tighten the screws (3) of
the cover (4).
Electrical system
ELE SYS - 117