APRILIA Tuono V4 1100 Factory Service Station Manual page 146

Electrical system
TABLE F3 - REAR SPEED SENSOR
•
Place the ABS rear speed sensor wir-
ing harness as shown and secure it
using the cable gland fastened to the
rear brake calliper support.
TABLE F4 - REAR SPEED SENSOR
•
Place a cable gland that fastens the
ABS rear speed sensor wiring harness
to the brake pipe.
TABLE G - REAR BRAKE SWITCH
•
Check that the rear brake switch con-
nector is well connected to its counter-
part and then secure it to the main
wiring harness with a clamp.
ELE SYS - 146
Tuono V4 1100 Factory