APRILIA Tuono V4 1100 Factory Service Station Manual page 291

Tuono V4 1100 Factory
•
Refit the clamp that fastens the cooling
system's pipe to the starter motor's wir-
ing harness and the ground lead.
•
Insert the front left internal cable gland
on the chassis and refit the wiring har-
nesses.
•
Connect the engine oil pressure bulb
connector and refit the clamp that fas-
tens the wiring harness to it.
•
Connect the ground leads and tighten
the fixing screw to the specified torque.
Engine from vehicle
ENG VE - 291