APRILIA Tuono V4 1100 Factory Service Station Manual page 567

Tuono V4 1100 Factory
Headlight assy.
To remove the headlight unit, first remove the top
fairing, the side fairings, the internal covers and the
front lock. Then proceed as described:
•
Remove the inner screws fastening the
headlight unit to the instrument panel
support.
•
Move the top fairing complete with
headlight unit out of the way by just
enough to reach and disconnect the
connector.
•
Remove the eight screws fastening the
headlight unit to the front fairing.
•
Separate the front fairing from the
headlight unit.
•
After reassembling, check that the headlight beams are aimed correctly.
Bodywork
BODYW - 567