Chassis
•
Unscrew the swingarm pin. As the pin
rotates it also turns the adjustment
bush, loosening it completely.
•
Support the front end of the swingarm
and drive the swingarm pin, complete
with adjuster bush, out from the right
hand side.
•
Using the rear mounting stand, remove
the swingarm completely from the ve-
hicle from the rear.
UPON REMOVING THE REAR SWINGARM PAY ATTEN-
TION NOT TO JAM THE GEARING CHAIN.
•
If necessary, use a specific tool to re-
move a pin from the drive chain.
•
Open and remove the chain.
Checking
•
Remove the swingarm.
•
Clean the two sides of the bearing
seats with a cloth.
•
Slide off the bushing (1).
•
Remove the sealing gasket (2).
•
Remove the sealing gasket (3).
•
Remove the circlip (4).
CHAS - 480
Tuono V4 1100 Factory