APRILIA Tuono V4 1100 Factory Service Station Manual page 469

Tuono V4 1100 Factory
Pos. Description
1 Rear wheel axle nut
2 Nuts used to fasten the crown to the
sprocket
3 Rear brake disc fastening screws
Rimozione
To proceed with the removal of the rear wheel, lift
the motorcycle using an appropriate rear stand,
and proceed as described:
•
Undo the fastening nut (1) of the wheel.
•
Remove the washer (2).
•
On both sides of the vehicle, loosen the
lock nut (3) of the adjuster screw (4)
and then tighten the adjuster screw to
release the tension of the chain ten-
sioner.
R
EAR WHEEL
Type Quantity
M25x1.5 1 120 Nm (88.51 lbf ft)
M10 5
M8 5
Torque
50 Nm (36.88 lbf ft)
30 Nm (22.13 lbf ft) Loct. 243
Chassis
Notes
-
-
CHAS - 469