APRILIA Tuono V4 1100 Factory Service Station Manual page 128

Electrical system
TABLE H - WIRING HARNESS ON THE LOWER
CHASSIS SHOULDERS
•
Operating on the internal right side, se-
cure the starter motor wiring harness to
the cooling system pipe using a clamp.
•
Place the main wiring harness inside
the cable gland on the internal side of
the chassis.
TABLE H1 - WIRING HARNESS ON THE LOW-
ER CHASSIS SHOULDERS
•
Operating on the internal left side,
place the wiring harnesses inside the
cable gland on the internal part of the
chassis.
ELE SYS - 128
Tuono V4 1100 Factory