APRILIA Tuono V4 1100 Factory Service Station Manual page 297

Tuono V4 1100 Factory
•
First fit a clamp on the metal plate and
insert it under the ABS modulator sup-
port as shown.
•
Insert the ABS modulator support at
the back, into the rubber ring.
•
Insert the screw that fastens the ABS
modulator support to the chassis and
the screw that fastens the metal plate
to the support and then tighten them to
the specified torque.
•
Tighten the clamp that fastens the
pipes of the ABS system.
Engine from vehicle
ENG VE - 297