Tuono V4 1100 Factory
•
Unscrew and remove the six screws.
•
Screw a M10x120 screw in the secondary shaft hole, from the alternator side, to make it
easier to extract the gearbox unit.
•
Use a rubber mallet to tap on the sec-
ondary shaft from the alternator side to
detach the gearbox cover from the
crankcase.
•
Remove the complete gearbox unit.
Gearbox shafts
Disassembling the gearbox
•
Select neutral and check that the sec-
ondary shaft does not move when the
primary shaft is rotated.
•
Remove the gearbox unit.
•
Slide off the gearbox primary shaft con-
trol rod (1)
Engine
ENG - 305