Tuono V4 1100 Factory
(if applicable)
REMOVAL
•
After removing the front bodywork, re-
move the five screws (1) that join the
two instrument cluster supports.
•
Remove the two screws (2) that secure
the instrument cluster support to the
frame.
•
Remove the control unit (3) from the support and disconnect the connector (4) to remove it.
ASC CONTROL UNIT - Diagnosis
Function
It manages the ASC system, the system safety checks and the self-diagnosis function
Level in electrical circuit diagram:
ASC Control Unit
Location:
•
on the vehicle: at the front, connected to the instrument cluster mount.
•
connector: on 34 PIN connector control unit (24 of which are active)
Pin out:See CONNECTORS paragraph
DIAGNOSTIC TOOL:INFO
(screen page/example values with key ON)
•
Hardware version / - (indicates the hardware version)
•
BOOT version / -
•
Software version / -
•
Map identification / -
DIAGNOSTIC TOOL:ACTIVATIONS
•
Suspension test - Softest setting - min damping / Minimum damping preload check
•
Suspension test - Hardest setting - max damping / Maximum damping preload check
DIAGNOSTIC TOOL: ERRORS
Electrical system
ELE SYS - 165