Tuono V4 1100 Factory
TABLE B - FRONT ABS SPEED SENSOR PRE-
FITTING
(SACHS)
•
After having pre-fitted the cable gland
(1) on the fork foot and having secured
the sensor, arrange its wiring harness
(2) as indicated and secure it with two
clamps (3).
TABLE B1 - FRONT ABS SPEED SENSOR
•
Pass the front ABS speed sensor wir-
ing harness as shown and using a
clamp, secure it together with the main
wiring harness on the radiator support.
Electrical system
ELE SYS - 115