Engine
Main transmission gear removal
In order to remove the primary gear, the clutch
cover, alternator cover and complete clutch must
be removed beforehand.
Then proceed as described:
•
Fit the special primary gear lock tool
Specific tooling
020850Y Primary gear lock
•
Unscrew and remove the fastener nut
of the primary gear.
•
Remove the lock tool and remove the
primary gear.
Specific tooling
020850Y Primary gear lock
Installing the primary drive gear
To install the primary gear, follow the procedure
described below:
•
Fit the primary shaft gear onto the
crankshaft, ensuring that it is aligned
correctly with the countershaft drive
gear. Align the markings on the respec-
tive teeth to align the gears correctly.
ENG - 384
Tuono V4 1100 Factory