APRILIA Tuono V4 1100 Factory Service Station Manual page 100

Maintenance
Adjusting the levers
FRONT BRAKE LEVER
It is possible to adjust the distance between the
end of the lever (1) and the grip (2), turning the
adjuster (3).
•
Push the control lever (1) forwards and
turn the adjuster (3) until the lever (1)
is at the desired distance.
•
Turning the adjuster anticlockwise, the
lever (1) gets closer to the grip (2).
REAR BRAKE LEVER
The control lever is set to the correct ergonomic
position during assembly of the vehicle.
To change the position of the lever:
•
Rest the vehicle on its stand.
•
Partially undo the screw (4).
•
Turn the cam (5) searching for the best
position for the pedal.
•
Tighten the screw (4) and check the
cam is stable in position.
Clutch system
Adjusting the lever
Adjust the clutch when the engine stops or the ve-
hicle tends to move forward even when clutch
lever is operated and the gear engaged, or if the
clutch "slides", resulting in acceleration delay con-
sidering the engine revs.
Minor adjustments can be realized by acting on the
clutch lever adjuster operating as follows:
•
Turn the set screw (3) toward the di-
rection of motion to increase the lever
play (1) and check operation of the
guide using the knob (2) as in riding
position.
MAIN - 100
Tuono V4 1100 Factory