APRILIA Tuono V4 1100 Factory Service Station Manual page 108

Electrical system
•
Check that the R&W connector is connected and routed correctly.
•
Check the RH and LH rear indicator connections.
•
Check the gear connector connection.
•
Check the quick shift connector connection.
•
Check that all the connectors inside the instrument support arch have been connected cor-
rectly.
CAUTION
THE CONNECTORS INDICATED IN THE LIST ARE CIRCLED IN GREEN IN THE VARIOUS PHO-
TOS. THESE CONNECTORS HAVE BEEN LISTED AS THEY ARE MORE CRITICAL THAN OTH-
ERS, AND THEIR DISCONNECTION MAY CAUSE VEHICLE BREAKDOWN OR MALFUNCTION.
NATURALLY, IT IS ALSO NECESSARY THAT ALL OTHER CONNECTORS CONNECTED COR-
RECTLY TO ENSURE THAT THE VEHICLE FUNCTIONS CORRECTLY. THE INSTRUCTIONS FOR
ROUTING AND FASTENING THE WIRING HARNESS THROUGHOUT THE VEHICLE MUST BE
FOLLOWED PRECISELY TO ENSURE THAT THE VEHICLE FUNCTIONS CORRECTLY AND RE-
LIABLY.
Front side
TABLE A - RH INSTRUMENT PANEL SUPPORT
PRE-FITTING
•
Position the two clip clamps as indica-
ted.
ELE SYS - 108
Tuono V4 1100 Factory