APRILIA Tuono V4 1100 Factory Service Station Manual page 114

Electrical system
TABLE A11 - ROUTING THE CABLES IN THE
INSTRUMENT PANEL SUPPORT AREA
•
Connect the instrument panel connec-
tor and check that a click is heard, con-
firming the correct connection.
•
After the CLICK is heard, gently pull the
instrument panel in the direction of the
arrow, so as to tension the cables. If
the connection is connection is correct,
the connector will stay in its place.
TABLE B - FRONT ABS SPEED SENSOR PRE-
FITTING
(OHLINS)
•
After having placed the front ABS
speed sensor on the fork leg, secure
the wiring harness using a cable gland
(1) and a clamp (2).
ELE SYS - 114
Tuono V4 1100 Factory