Table of Contents
Advertisement
FDM Vantage User Guide
3. Select the part to build and press ENTER. For more information on the job queue,
see "Working with the Job Queues" on page 5-10.
Building a Sample Job in the Queue (Show Sample Job Queue)
1. From the Main Menu select Build Job and press ENTER.
2. Select Show Sample Job Queue and press ENTER.
3. Select the part to build and press ENTER. For more information on the sample job
queue, see "Working with the Job Queues" on page 5-10.
Warnings Before Job is Built
If you see the following warning screen, one or more of the conditions is preventing
the part from being built. See the following text on how to correct the condition(s):
>Replace Worn Model Tip..
Model Canister to ABS..
Change Support Canister to ABS_S..
Need both canisters present..
Need More Model Mat'l ( 9.1 more)..
Need More SUPPORT Mat'l ( 8.2 more)..
Model / Support Mat'l Incompatibility..
Replace Model tip with T12..
Replace Support tip with T12..
Vacuum not present - Please check build sheet -
Continue..
To correct the condition(s):
a. Select the condition and press ENTER.
b. Perform the action required. The job will continue once you properly fix the
condition. You can press MENU several times to return to the warning screen.
Note: "Continue.." may be selected to bypass warnings and continue to build a
job, but this is not recommended. If a warning cannot be removed,
contact Customer Support.
Information Available While Building
The following information is available while building a job:
•
The elapsed and estimated build time are displayed in hours and minutes.
•
The material types and amounts to build are displayed on the third line.
•
The current and final Z height of the job is displayed to the right of the last line.
Information Available If a Job Fails While Building
If a job fails, you can determine the last layer built. From the system interface choose:
Modeler Status > Machine State > System Status
Operating the Machine
5 - 7
Hide quick links:
Advertisement
Table of Contents
