• Press ENTER key, the LCD display shows "FX-XX" on left 5 digit LCD display,
Middle 5 digit LCD display "STATE" , right 5 digit LCD display setting 1~150,
"FX" means to select the state F1-F9. "XX" means the test STEP01-16,setting
State value,press UP and down Key or keypad to adjust setting.
• Test time setting:
Press ENTER to set TIME value, press UP, DOWN keys or KEYPAD to adjust
Settings, range from 100 ms~9999ms.
Press SAVE key to finish editing the action is set to REPEAT if you do not save
The settings, press the EXIT key to leave edit mode.
•
Setting REPEAT(REPEAT TEST) ,Press UP and DOWN key or Keypad to
Adjust setting 0~9999, Press SAVE REPEAT Value, or press EXIT key
Exit EDIT MODE.
Fig 3-8 STORE (EDIT) MODE OPERATIONO FLOW-CHART
3270 Series Operation Manual 85