Table of Contents
Advertisement
40 PRODIGIT
3.3.19.
CF key only functions upon C.C. and C.P. mode and all LED off upon Linear C.C.,
C.R. and C.V. mode. √2, 2, 2.5, 3, 3.5 keys are used to quick change the current
C.F. (Crest Factor) of C.C. mode. However, adjust the CF by number key or Up,
Down or rotary switch to setting the C.F. values.
The CF key can be set to the range of 1.0, 1.1, 1.2, 1.3, 1.4 to 5.0, and the CF 1.0
To 1.3 are the SCR/TRIAC current phase modulation waveforms and the half-wave
Load simulation. The waveforms of the first cycle and the last cycle may differ
Depending on the angle setting of LD ON and LDOFF. The setting sequence is as
Follows:
•
Press the CF key, and √2 key settings will be automatically saved and exit.
CF
Key and √2, 2, 2.5, 3, 3.5 key
1.4 ~5.0
(1.3)TRAIL: Trailing edg
(1.2)LEAD: Leading edge
(1.1)LDNEG: negative half-cycle loading
(1.0) LDPOS: positive half-cycle loading
Advertisement
Table of Contents
