Prodigit 3270 Series Operation Manual page 63

54 PRODIGIT

The right upper 5 digit monitor display the Turbo and right lower monitor display
"OFF" ,use the knob and the key to switch ON or OFF.

ISTAR: setting the start current point, the Left 5 digit monitor display the
"OCP" ,the right upper 5 digit monitor display the "ISTAR", and right lower monitor
display setting value, the unit is "A". The range is 0.001A to the full scale of the CC
mode specification.

ISTEP: setting the increment step current point, the Left 5 digit monitor display the
"OCP" ,the right upper 5 digit monitor display the "ISTEP", and right lower monitor
display setting value, the unit is "A". The range is 0.001A to the full scale of the CC
mode specification.

ISTOP: setting the stop current point, the Left 5 digit monitor display the
"OCP" ,the right upper 5 digit monitor display the "ISTOP", and right lower monitor
display setting value, the unit is "A". The range is 0.001A to the full scale of the CC
mode specification.
TURBO ON state, the maximum stop current that can be set is "ISTAR +
10X ISTEP current value.