Prodigit 3270 Series Operation Manual page 154

Appendix D 3270 series Auto. Sequence function provide EDIT,
ENTER, EXIT, TEST and STORE 5 keys operation.
Edit mode
1. Set mode, Range, current level ... Load Setting an, Load ON
2. Press STORE key to store the load setting in memory STATE
3. Repeat 1~2, for the sequence load setting.
4. Press Shift + SEQ. key of 3270 series front panel.
5. Press up/down key to select Edit Mode.
6. Press 1~9 number key program number.
7. Press STATE up/down key to select memory state.
8. Press ENTER to next step.
9. Repeat 6~8 to edit Step of sequence
10. Press SAVE to confirm the step
11. LCD shows "rept" to setting repeat count.
12. Press up/down key to set repeat count of sequence loop.
13. Press ENTER to confirm the sequence edit.
Test mode
1. Press Shift + SEQ. key of 3270 series front panel.
2. Press up/down key to select Test Mode.
3. Press 1~9 number to select sequence number
4. Press ENTER to execution the sequence
5. The LCD shows "PASS" or "FAIL" after testing.
AUTO SEQUENCE:
AUTO SEQUENCE SET COMMAND
FILE {SP} {n}{； NL}
STEP {SP} {n} {；NL}
TOTSTEP {SP} {n}{；NL}
SB {SP} {m} {；NL}
TIME {SP} {NR2} {；NL}
SAVE {；NL}
REPEAT {SP} {n} {；NL}
RUN {SP} {F} {n} {；NL}
3270 Series Operation Manual 145
NOTE
n=1~9
n=1~16
Total step n=1~16
m=1~150
m:STATE
100~9999(ms)
Save "File n" data
n=0~9999
N=1~9
RETURN
1~9
1~16
1~16
100~9999(ms)
0~9999
AUTO REPLY
"PASS" or "FAIL:XX"
(XX=NG STEP)