Prodigit 3270 Series Operation Manual page 73

64 PRODIGIT

BATT CP : setting the BATT CP, the Left 5 digit monitor display the "BATT" ,the
right upper 5 digit monitor display the "CP", and right lower monitor display setting
value, the unit is "W". The range is 0.1W to the full scale of the CP mode
specification.

BATT CF: setting the CF, the Left 5 digit monitor display the "BATT" ,the right
upper 5 digit monitor display the "CF", and right lower monitor display setting value.
The range is 1.0、1.1、1.2、1.3、1.4 ~5.0,the setting sequence is shown below:
BATT CF 1.4 ~5.0
(1.3) BATT CF TRAIL: Trailing edg
(1.2) BATT CF LEAD: Leading edge
(1.1) BATT CF LDNEG: negative half-cycle loading 
(1.0) BATT CF LDPOS: positive half-cycle loading



